#Bluesuite usbspi driver software#
#Bluesuite usbspi driver Bluetooth#
#Bluesuite usbspi driver series#

This allows the module to function inВ free air-space while there is a complete seal around it.

Apply glue around the bottom perimeter of the cover where it sits on the PCB. Place a plastic cover over the module (like a hat), make the cover large enough to cover the whole module. Also, it's worth mentioning that applying any compound, conformal coating or potting directly to the module WILL void the warranty.В If your application requires 100% sealing of the radio module, there is a way to do this very successfully without impacting the module performance. You should run tests on their particular potting compound and evaluate radio's performance and range. There are potting compounds and conformal coatings which have very good dielectric constants and are suitable for 2.4 GHz potting applications, however, when you apply any of these, they were not accounted for in the circuit design and might reduce performance of the device (or all together cause it not to function). Some of the capacitive and inductance values are as low (pF and nH) and could be sensitive to contacting materials such as potting compounds. If you plan on encapsulating the radio module in a potting compound or conformal coating, you must assure that the compound in liquid or solid form does not enter under the shield where there are sensitive RF components. We highly do not recommendВ conformal coating the radio module. If you MUST clean PCB with chemicals it is recommended that you test on one board and then confirm the module still works after the process, prior to adding it to production, while understanding the above affects washing the populated PCBs can have on the module. We do not recommend chemical cleaning and cannot guarantee it will not damage the modules. However, if water washing is required you will need to use deionized water.

Ultrasonic cleaning could damage the module permanently.

The solvent could also damage any stickers or labels.

Cleaning with alcohol or a similar organic solvent will likely flood soldering flux residuals into the RF shield, which is not accessible for post-washing inspection.

Water could also damage any stickers or labels. The combination of soldering flux residuals and encapsulated water could lead to short circuits between neighboring pads.

Cleaning with water can lead to capillary effects where water is absorbed into the gap between the host board and the module.

Residuals under the module cannot be easily removed with any cleaning process. In general, cleaning the populated modules is strongly discouraged.

#Bluesuite usbspi driver Bluetooth#

Windows 8 devices do natively support BLE, with Win 8.1 being the best option again any inbuilt Bluetooth hardware need to be disabled first.

In these implementations, any inbuilt classic BT hardware must be disabled to avoid conflicts. Please be advised that Win 7 devices do not natively support BLE, causing the BT820 to act as a classic BT radio.

In Windows XP Service Pack 2 onwards, the BT820 should be automatically detected by the operating system when plugged in and will automatically install.

#Bluesuite usbspi driver software#

The BT820 can be used with any Windows, MAC, or Linux device that has a Bluetooth software stack on board вЂ“ Laird does not provide the Bluetooth software stack. The BT820 presents a standard Bluetooth HCI interface and requires that the Bluetooth software stack resides on the host operating system that the USB device is plugged into. The BT820 is a packaged USB dongle version of the BT800 module that provides Bluetooth hardware only support for both classic Bluetooth and Bluetooth Low Energy (BLE). Quick Start Guide - Configuring the BT800 in Linux and Android.pdfД«luetooth Development Kit Terminal Download.zipДЄpplication Note - Guidelines for Replacing Antennas v1.0Д®U Certifications - BT800/BT800-ST/BT820 - 2020ДЇCC Certifications - BT800/BT800-ST/BT810/BT820 Hardware Integration Guide - BT800-ST.pdf

#Bluesuite usbspi driver series#

Application Note - Modifying PID and VID on the BT820.pdfДЄpplication Note - BT800 WLAN Coexistence Schemes and LED Indication.pdfДЄpplication Note - BT800 Development Kit.pdfДЄpplication Note - BT800 Series HID Proxy.pdfДЄpplication Note - Bluetooth Latency and Data.pdf